Fitting glass windows in metal frames is common for car windshields, machinery inspection windows and see-through cabinets. Though caulking agents are used, the strength, productivity and sealing capabilities are faulty. This leads to warranty claims for re-caulking or loss of production.
Limitations with conventionally used methods:
- Low strength when holding glass in frame
- Slow curing and loss of productivity
- Degradation as bonding agent is not resistant to chemicals
- Compression set of the window gasket leads to frame corrosion
Provide high green strength eliminating need for window mounting hardware
Provide high final strength improving reliability
Provide fast curing increasing productivity
Bond and seal in one go
Excellent resistance to chemicals and solvent
Fitting windshield in the cabin of a construction equipment
Bond and seal glass to painted metal doors of an electrical cabinet
Bond and seal glass to painted metal doors of a CNC machine
Eliminating leakage issues in the final product
An electrical cabinet manufacturer in India used LOCTITE to replace leaking window gaskets that allowed corrosion to streak the paint finish.Know More
Eliminating leak paths to increase product reliability
A CNC machine manufacturer used LOCTITE to replace leaking window gaskets that permitted coolant leaks and allowed rust to streak the paint finish on the metal doors.Know More
Increasing the output of your production line
An equipment cabin windshield manufacturer met the required production increase using LOCTITE.Know More
Clean the parts.
For polyurethanes, apply glass primer to the bond line areas and adhesive beads on the glass edges. For modified silanes this step is not needed.
Dispense adhesive through a manual cartridge dispenser on the metal part.
Place the glass panel in position and compress the bead for uniform thickness.
Looking to improve the reliability of your assemblies?
Learn how LOCTITE Structural Bonding solutions can help you in achieving reliable results with maximum strength.
Looking for professional advice?
Talk to our expert for first-hand information for achieving reliable results with LOCTITE Structural Bonding solutions.
We have been using welding for our structural requirement. Will structural adhesives be able to achieve the right strength?
LOCTITE structural adhesives have been proven to be able to take almost as much load as overlap welding and that too at only half the cost. LOCTITE adhesive also offer other advantages like making the process simple, and providing sealing along with bonding.
We use adhesive tapes. It is not messy. Wouldn’t using LOCTITE adhesives increase the process time and cost?
While double sided adhesive tapes are not messy, their application process is definitely very long and complicated – what with the need to cut to specific dimensions and expensive activators. LOCTITE adhesives are mostly applied through static mixers that ensures precise application without any mess.
We are using polypropylene and we have tried to use multiple methods and adhesives before, but they didn’t work. Which LOCTITE adhesives would be suitable?
There are many suitable LOCTITE structural adhesives based on acrylic, epoxy, modified silane and hybrid technologies that would be ideal for bonding polypropylene. Drop a query to our LOCTITE experts with the specifics of the application requirement and they will be able to recommend the right solution.
Replacing rivets is out of question – if we use adhesives, it will take longer to bond but with rivets we would be able to assemble instantly.
Rivets offer the advantage of instant assembly, however result into concerns of reliability because of uneven stress concentrate points that become fatigue and failure points and also lead to corrosion. Instead, LOCTITE structural adhesives offer better reliability and come in various cure types which can be further accelerated with the help of activators.
Can LOCTITE products withstand loads under extreme humidity and temperature conditions?
Yes, LOCTITE structural adhesives have been designed to withstand heavy loads under various ambient conditions. Especially, LOCTITE structural adhesives based on modified silane technology which cure in the presence of humidity, are excellent for outside applications where high temperature, UV resistance etc. features are preferred.
Which LOCTITE structural adhesives can bond rubber to metal?
LOCTITE structural adhesives based on acrylic, epoxy, modified silane technology and hybrids are excellent for bonding rubber to metal. Drop a query to our LOCTITE experts with the specifics of the application requirement and they will be able to recommend the right solution.
Is it possible to bond glass to glass or glass to metal with LOCTITE adhesives?
Yes, bonding dissimilar substrates like glass to metal or even glass to glass is possible with LOCTITE adhesives. If optical clarity and aesthetics is a must, choose clear epoxies like LOCTITE E-30 CL. Otherwise LOCTITE acrylics are also a great choice for bonding glass to metal or glass to glass. Prefer modified silanes if glass has to be fixed to a metallic frame. Drop a query to our LOCTITE experts with the specifics of the application requirement and they will be able to recommend the right solution.
Is any surface preparation needed before applying LOCTITE structural adhesives?
Removal of dirt, dust or other surface impurities from the surfaces to be bonded is important before adhesive application as they can interfere with the effectiveness of the bond strength. This can be achieved through either degreasing or abrasion. Chemical treatments like primers, corona discharge, flame and plasma treatments can also be used to modify the surface properties to further enhance bond strength.
What is meant by open time/working time/pot life of an adhesive?
Open time is the time within which parts should be assembled post application of the adhesive to ensure proper surface wetting and achieve maximum strength.
What does on part life of adhesive signify?
This term is relevant for adhesives where activator is used on one of the parts. On-part life is the time within which activator or primer provides full performance.
What is the difference between fixture time and full cure time?
Fixture time of an adhesive is the time needed to achieve enough strength to hold the parts together without additional support or to achieve lap shear strength of 0.1 N/mm2 whereas full cure time of an adhesive is the time needed to achieve full performance.
What is a hybrid adhesive?
Combination of two different adhesive technologies, which are normally stand-alone technologies and at the outset cannot be manually mixed. A Hybrid combines the positive attributes of both technologies which provides new performance parameter. LOCTITE Hybrid adhesives combine the speed of cyanoacrylates (commonly known as instant adhesives) with the strength of epoxies/acrylates to give universal that can bond anything in seconds providing high strength.