How to use TEROSON MS 930?
The substrates must be clean, dry, oil- and grease free. Depending on the surface it can be
necessary to roughen the surface or to use a primer/adhesion promoter to provide best
Application from 310 mL cartridges is made with the TEROSON Hand or Air Pressure Pistols,
and from foil cartridges (310 and 570 mL) with the corresponding FK-Hand or FK-Air Pressure
Pistols. In the case of compressed air application a pressure of 2 to 5 bar is required. Low
material temperatures of the sealant will lead to an increase of
viscosity, resulting in a lower extrusion rate. This can be avoided by bringing the sealant
up to room temperature prior to application.