Reliable Sealing for Unstoppable Operations
Dekho Parkho Jaano

LOCTITE Thread Sealants offer an effective method for sealing pipe joints to prevent leakages. Being a paste, they can be easily applied between the threads of metal pipe joints. LOCTITE Thread Sealants harden into a tough thermoset plastic and prevent leakage of gases and liquids by sealing the pipe. After gaining full strength, they can withstand pressure up to 10,000 psi which is more than the pressure resistance of most pipe systems.

Benefits of LOCTITE Thread Sealants
over Conventional Methods

LOCTITE vs Thread Tape

Thread tape allows for better fitting of threaded pipe joints. However, it does not eliminate all the gaps which LOCTITE can fill completely.

LOCTITE vs Thread Paste

WHY CHOOSE LOCTITE THREAD SEALANTS
  • Reliably seal threaded pipe fittings: a. Seals upto burst strength of most pipe systems (pressure resistance: 68.9 N/mm2)
  • Outperform thread tapes and pastes a. Allows joint adjustment post application
    b. Does not clog or contaminate lines
  • Prevent Galling and Corrosion: a. Protects threads from corrosion
    b. Controlled lubricity prevents galling
VIEW ALL BENEFITS
LOCTITE Solutions Across Industries
LOCTITE offers solutions tailored to solving industry-specific challenges, which can optimize manufacturing processes and drive down cost.
 

Industrial Manufacturing Maintenance

Industrial equipment manufacturers design and build machines that make other machines and end products.

LOCTITE products help industrial equipment manufacturers in maintaining smooth operations and high productivity of all machines.

Problem Areas
  • Maintenance of Electric Motors

    Maintenance of Electric Motors

  • Maintenance of Pumps

    Maintenance of Pumps

  • Maintenance of Gearbox

    Maintenance of Gearbox

Read more
 
 

Paper and pulp

The harsh environment of the paper and pulp industry leads to a variety of maintenance challenges.

LOCTITE can help in eliminating the challenges and increase the productivity of machines.

Problem Areas
  • Maintenance of Electric Motors

    Maintenance of Electric Motors

  • Maintenance of Pumps

    Maintenance of Pumps

  • Maintenance of Gearbox

    Maintenance of Gearbox

Read more
 
 

Rubber and Plastic

The versatile end products manufactured put immense stress on the processing machinery.

LOCTITE products help the machines run smoothly under extreme working conditions, while maintaining high productivity.

Problem Areas
  • Maintenance of Electric Motors

    Maintenance of Electric Motors

  • Maintenance of Pumps

    Maintenance of Pumps

  • Maintenance of Gearbox

    Maintenance of Gearbox

Read more
 
LOCTITE Thread Sealants Product Range
Taking into consideration the various types of fluid flow systems like hydraulic and pneumatic, coarse threaded and fine threaded, LOCTITE offers a wide range of thread sealants to fulfil your requirement.

Frequently asked questions

Here’s a list of queries with responses that might help you.

  Will LOCTITE thread sealant be able to withstand pressure >200 bar?

Yes. LOCTITE thread sealants can take pressures upto 689 bars on a conservative basis and with dimensionally stable threaded assemblies, LOCTITE thread sealants can be used at upto 1000 bar.

  Do Loctite products contaminate the fluid media?

LOCTITE products when cured, harden into a thermoset plastic which does not mix with the fluid media that is flowing through the pipe. Hence there is no contamination. If some materials remain cured, they get dissolved in fluid media.

  How do I know whether LOCTITE thread sealant is compatible with the fluid or not?

LOCTITE thread sealants are compatible with a wide range of fluid. Please check the Fluid Compatibility Chart for the concerned fluid.

  Can I use LOCTITE thread sealant on pipes that carry oxygen or other strong oxidizers?

We do not recommend the use of LOCTITE anaerobic thread sealants for fluid media like oxygen. However, we do have a special variant which is compatible with such media. Please contact us for more details.

  Can the curing of LOCTITE thread sealant be expedited?

Yes. In case you need immediate testing, use LOCTITE 55 which once wrapped around the joint, gives instant sealing.

  How to disassemble a joint which has been sealed with LOCTITE thread sealant?

It is easy to disassemble joints sealed with LOCTITE thread sealants with standard hand tools. In case that is not sufficient, use localized heat upto 250 degrees celsius, and disassemble while hot.

  When is a LOCTITE thread sealant fully cured?

The cure speed of LOCTITE thread sealant depends upon the thread material, thread size and temperature. For fine thread sizes, full cure can be obtained within 24 hours. For faster curing requirement, use of Primers 7649 or 7471 is recommended. Please refer to Technical Data Sheet of the chosen product for further details.

  Since the LOCTITE thread sealants are liquid, will they create a mess during operations?

LOCTITE thread sealants are thixotropic in nature and hence will not flow to other areas. Also, LOCTITE thread sealants come with a nozzle for precise application on the joint engagement area. Hence, there is no scope for a mess. In case of any additional amount coming out of the nozzle, you can wipe it off easily because as long as LOCTITE thread sealant is in contact with air, it will remain a liquid and not cure at all.

  When should a Primer be used with LOCTITE thread sealants?

It is highly recommended to use Primers 7649 or 7471 with inactive thread surfaces like stainless steel, aluminium, plated surfaces etc., to ensure complete seal. Also, use of Primers is recommended in case you need faster curing.

  Which thread sealant is best for plastic joints?

LOCTITE 55 Pipe Cord is the best for sealing plastic joints.

  What is the difference between a threadlocker and a thread sealant?

LOCTITE threadlockers and thread sealants have each been developed for specific applications and purposes. Threadlockers lock and seal threaded parts to provide higher locking strength, Whereas, thread sealants seal threaded parts so that they can withstand higher fluid pressures.

  Some thread sealants are liquid while others are in thick paste form. Are liquid thread sealants good for sealing?

Yes. Liquid thread sealant is used for hydraulic and pneumatic systems that normally have filters inside. These liquid sealants contain no fillers or particles and therefore there is no need to be concerned about clogging the filtering system or contaminating system fluids with the filler particles. Hydraulic and pneumatic threads are very fine and have a tight fit. Liquid sealants provide an excellent sealing in this case.

For Queries and More Details,

Email - customer.enquiries@henkel.com

Working hours: Monday to Friday, 9 AM to 5:30 PM (except public holidays)

REQUEST A FREE SAMPLE
Get a Free Sample Delivered to Your Business Address
Share the following details, so we can get in touch with you.
  • 1 Basic Info
  • 2 Additional Details
  • 3 Thank You
Select a product you would like to Sample*
Full Name *
Official Email Address *
Company Name *
Pincode *
Mobile number *
Compare