Unstoppable operations are a ‘request’ away.
Request a free sample now!

Close
Case Studies
  • threadlocking-case-study-1

    Threadlocking Solutions for Keeping Set Screws in Place

    Bearings in a machine, commonly hold on to a shaft via set screws. However, set screw loosening can cause heavy damage to all components and result in costly replacement & downtime. Here is how a paper mill discovered one way to maintain initial set screw torque and save 10 hours of costly machine downtime.

    DOWNLOAD CASE STUDY
  • threadlocker-case-study2

    Threadlocking Solutions for Anchoring Bolts

    Mounting bolt reliability is important for proper equipment performance. However, it is subject to heavy vibration and needs more strength. This case study is about a mining operation that required constant replacement of anchor bolts in a jaw crusher. These bolts were loosening frequently and also damaging the concrete footing of the jaw crusher. Finally, a solution to anchor the bolts for eliminating damage, was applied.

    DOWNLOAD CASE STUDY
Threadlocking
  • threadsealing-case-study1

    Thread Sealing Solutions to Meet Health Regulations

    Conventional sealants like thread tape, shred while tightening. These shreds can travel downstream and clog filters or even contaminate the fluid. However, for a food and beverage manufacturer, it became imperative to solve this challenge in order to comply with the health regulations.

    DOWNLOAD CASE STUDY
  • threadsealing-case-study2

    Proactive Solutions for Sealing Compressed Air Leaks

    Compressed air leaks highly affect your overall operation efficiency. However, they are quite difficult to identify and repair. A fiberglass insulation manufacturer was facing the same challenge and benefited by a guided plant survey that was conducted by the LOCTITE team, at their premises.

    DOWNLOAD CASE STUDY
Thread Sealing
  • retaining-case-study1

    Retaining Solutions that Save Huge Machining Costs

    Bearing spinout is a common phenomenon which occurs when the fitting becomes loose. This increases the clearance between the bearing and shaft, and to repair that, the shaft needs to be machined. However, machining is a huge investment in terms of time and money. A cement manufacturer found a solution to avoid costly machining and get the shaft-bearing assembly up and running in a few hours.

    DOWNLOAD CASE STUDY
  • retaining-case-study-2

    Retaining Solutions to Maintain Shaft Uniformity

    Shaft wear can prove costly as this often requires replacement of the entire shaft. Not only does this mean high scrap cost, but also involves huge inventory costs. What if there was a situation in which the required shaft size was not in reserve? A cement manufacturer experienced the same situation and found a way to avert the huge downtime.

    DOWNLOAD CASE STUDY
Retaining Compounds
  • case-study-tabimg1

    Gasketing Solutions for Sealing Gearbox Housing Flanges

    Leaks in industrial gearboxes can be fatal to the equipment performance and life. Pre-cut gaskets could not solve the recurring leaks making regular maintenance a necessity in a steel company. The manufacturer then found a way to seal the gearboxes. The solution led to reduction in frequent downtime and costly leaks.

    DOWNLOAD CASE STUDY
Gasketing

For Queries and More Details,

Email - customer.enquiries@henkel.com

Working hours: Monday to Friday, 9 AM to 5:30 PM (except public holidays)