Home Gasketing Compounds Loctite SI 596

Loctite SI 596

(3.6) 23 Reviews

View Product details Download e-Brochure

Compare

814 (GST extra)

Additional Details
Total Price	881
Discount	7.58%
Discounted Price	814
GST	18.00%

961 (GST inc. price)

~~881~~ 7.58% OFF

View Introductory Coupons View Bulk Discounts

Overview

LOCTITE 596 cures on exposure to moisture in the air to form a tough, flexible, waterproof, oil-resistant silicone rubber bond. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Ideal for assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting, and heating elements in electrical appliances.

Fills Gaps upto 6.35 mm
260°C Service Temperature
Resists Aging, weather and Thermal Cycling

Gasketing Compounds Buying Guide

Quantity

Minimum Order Quanity- 1 Piece

Use Code: Copied

Coupon:

TRYLOCTITE

Get upto 50% off, for first time buyer only

View all Offers

Size

300 ml Cartridge 85 g

Check serviceability at your Pincode:

Delivery available at

Update

Total order value	Shipping charges
500	Flat 50
501-1500	Rs 50 or 7.5 % of order value, whichever is higher
1501-5000	5% of order value ( 75 to 250)
5001	Free ( 0)

Bulk discount

2 - 25 qty

10.00 %

Rs. 792 piece

26 - 50 qty

15.00 %

Rs. 748 piece

51 - 100 qty

20.00 %

Rs. 704 piece

101+ qty

25.00 %

Rs. 660 piece

Final discount applicable will be based on the total quantity in your cart

More than 101 quantities? Get customized price

Generate Quote

Request Callback

BUY NOW ADD TO CART

OurGuarantee

As per Loctite's policy
100% Original Products
Secure Payments
100% Buyer Protection

Occupies all surface imperfections between flange surfaces providing a leak proof seal.
Oxime silicones which do not corrode flange surfaces unlike ordinary RTV sealants which are acetoxy based.
Eliminates gasket compression set.
Reduces inventory cost and complexity as one tube can make many different shapes and sizes of gaskets.
Provides instant seal.

Cure Time

: 24 hours

Size

: 300 ml Cartridge

Gap Fill

: Upto 6.35 mm

Flange Type

: Rigid/Stamped

Flange Material

: Metal/Plastic

Gasket Type

: Silicone RTV (Room Temperature Vulcanization)

Skin Formation Time

: 50 mins

Temperature Resistance (Continuous)

: 260°C

Cure Time

: 24 hours

Size

: 300 ml Cartridge

Gap Fill

: Upto 6.35 mm

Flange Type

: Rigid/Stamped

Flange Material

: Metal/Plastic

Gasket Type

: Silicone RTV (Room Temperature Vulcanization)

Skin Formation Time

: 50 mins

Temperature Resistance (Continuous)

: 260°C

We require a gasket that can withstand very high pressures. Can we use Loctite Gasketing solutions?

Yes, LOCTITE Anaerobic Gaskets can resist pressure upto 34.47 N/mm2.

Our design uses the pre-cut gasket as a shim. Is there any way to use Loctite Gasket in case the gaps between the flanges are large?

Yes, in case the product design specifies the use of pre-cut gasket as a shim, LOCTITE Anaerobic Gasket Dressing can be used in conjugation with the pre-cut gasket. Just clean the flange surfaces and apply LOCTITE Anaerobic Gasket Dressing to both the sides of a fresh pre-cut gasket. Make sure to use a primer on both the sides of the pre-cut gasket before application of the Gasket Dressing.

What type of materials can LOCTITE gasketing compounds be used on?

LOCTITE gasketing sealants can be used on many different materials including metals, wood, rubber, plastic, ceramics, glass and even concrete. The type of sealant selected for a specific application depends on the material to be sealed, environmental conditions, temperature and operating pressures in the system.

There are some traces of the old gasket left on the parts. What can be used to remove them?

In order to remove any old gasket parts, you can use LOCTITE SF 790 Chisel Gasket Remover.

We have to seal a fuel system. Would LOCTITE gasketing compounds be effective?

Yes. LOCTITE has two types of gasket technologies - one is anaerobic and the other is high performance Silicones. LOCTITE Anaerobic Gaskets are resistant to gasoline and Fuel oils. LOCTITE High Performance Silicones are 8 times more oil resistant than standard RTV silicones and hence perform well when used to seal hot oil systems like oil pans. They are both definitely superior to ordinary silicones as the latter swell and loose their sealing ability when used to seal fluid systems.

How can we disassemble a part sealed with LOCTITE Gasketing Compound?

In order to disassemble the flanges sealed with LOCTITE Gasketing Compound, just use hand tools, and clean the flange surfaces with LOCTITE SF 790 Chisel Gasket Remover.

LOCTITE 243

Threadlocker

LOCTITE 542

Thread Sealant

LOCTITE 638

Retaining Compound

LOCTITE 518

Flange Sealant

Loctite SI 596