Buy Loctite SI 5900 Online in India at Best Prices

Additional Details

Discounted Price

4391

GST

18.00%

Additional Details

Discounted Price

4391

GST

18.00%

Loctite SI 5900 Overview

LOCTITE SI 5900 is a silicone based gasketing product suitable for various substrates. Typical applications include stamped sheet metal covers like timing covers and oil sumps

Fills Gaps upto 6 mm
204°C Service Temperature
Good Oil Resistance

Gasketing Compounds Buying Guide

Total order value	Shipping charges
Upto 500	Flat 50
Greater than 500	Free ( 0)

Total order value

Shipping charges

Upto 500

Flat 50

Greater than 500

Free ( 0)

Features & Benefits Specifications Technical Documents How To Videos FAQs

Occupies all surface imperfections between flange surfaces providing a leak proof seal.
Oxime silicones which do not corrode flange surfaces unlike ordinary RTV sealants which are acetoxy based.
Adheres to metal, plastic, glass and ceramic materials.
Reduces migration of liquid after application.

Color

: Black

Cure Time

: 24 hours

Size

: 300 ml Cartridge

Gap Fill

: Upto 6 mm

Flange Type

: Rigid/Stamped

Flange Material

: Metal/Plastic

Gasket Type

: Silicone RTV (Room Temperature Vulcanization)

Skin Formation Time

: 20 mins

Temperature Resistance (Continuous)

: 204°C

Color

: Black

Cure Time

: 24 hours

Size

: 300 ml Cartridge

Gap Fill

: Upto 6 mm

Flange Type

: Rigid/Stamped

Flange Material

: Metal/Plastic

Gasket Type

: Silicone RTV (Room Temperature Vulcanization)

Skin Formation Time

: 20 mins

Temperature Resistance (Continuous)

: 204°C

We require a gasket that can withstand very high pressures. Can we use Loctite Gasketing solutions?

Yes, LOCTITE Anaerobic Gaskets can resist pressure upto 34.47 N/mm2.

Our design uses the pre-cut gasket as a shim. Is there any way to use Loctite Gasket in case the gaps between the flanges are large?

Yes, in case the product design specifies the use of pre-cut gasket as a shim, LOCTITE Anaerobic Gasket Dressing can be used in conjugation with the pre-cut gasket. Just clean the flange surfaces and apply LOCTITE Anaerobic Gasket Dressing to both the sides of a fresh pre-cut gasket. Make sure to use a primer on both the sides of the pre-cut gasket before application of the Gasket Dressing.

What type of materials can LOCTITE gasketing compounds be used on?

LOCTITE gasketing sealants can be used on many different materials including metals, wood, rubber, plastic, ceramics, glass and even concrete. The type of sealant selected for a specific application depends on the material to be sealed, environmental conditions, temperature and operating pressures in the system.

There are some traces of the old gasket left on the parts. What can be used to remove them?

In order to remove any old gasket parts, you can use LOCTITE SF 790 Chisel Gasket Remover.

We have to seal a fuel system. Would LOCTITE gasketing compounds be effective?

Yes. LOCTITE has two types of gasket technologies - one is anaerobic and the other is high performance Silicones. LOCTITE Anaerobic Gaskets are resistant to gasoline and Fuel oils. LOCTITE High Performance Silicones are 8 times more oil resistant than standard RTV silicones and hence perform well when used to seal hot oil systems like oil pans. They are both definitely superior to ordinary silicones as the latter swell and loose their sealing ability when used to seal fluid systems.

How can we disassemble a part sealed with LOCTITE Gasketing Compound?

In order to disassemble the flanges sealed with LOCTITE Gasketing Compound, just use hand tools, and clean the flange surfaces with LOCTITE SF 790 Chisel Gasket Remover.

Product Recommender

Value Calculator

Loctite SI 5900

Loctite SI 5900 Overview